Waveshare Industrial IoT Wireless Expansion Module for CM4

DescriptionContents:CM4-IO-WIRELESS-BASE x1PCIe to 4G/LoRa adapter x1Screwdriver x1Screws pack x1Industrial IoT Module Based On CM4Suitable For IoT Applications Like IoT Getaway, Wireless Router, Intelligent Data Acquisition…4G/5G/LoRa Support, Multi InterfacesThis is an industrial expansion module based on Raspberry Pi CM4, which features common interfaces such as Gigabit Ethernet, HDMI, USB, and GPIO, allows additional 4G / 5G / LoRa wireless communication modules to be connected via the M.2 or Mini-PCIe socket. There are also industrial interfaces/resources including RS485, CAN, and RTC.Combined with the industrial rail-mount protection case, the module is an ideal choice for building IoT gateway, 4G/5G router, IoT data acquisition, or even the PLC device in industrial automatic control system, and more.Part List ComparisonBASIC KITBASIC KIT 4G MODULECM4 wireless base board√√Black ABS case√√PCIe to 4G/LoRa adapter√√SIM7600G-H-PCIE 4G module√PCB antenna√* please refer to Package Content for exact part list info.SpecificationsCM4 SOCKETsuitable for all variants of Compute Module 4NETWORKINGGigabit Ethernet RJ45M.2 B KEY / Mini-PCIe (via adapter), for connecting 5G / 4G / LoRa wireless moduleNano-SIM card slot, supports standard Nano-SIM card for 5G/4G/3G/2G communicationUSBUSB 2.0 × 3PIN HEADERNon-isolated RS485 × 2, Non-isolated CAN × 1, Partial GPIO pinsCAMERAMIPI CSI-2 × 1 (15pin 1.0mm FPC connector)VIDEOHDMI × 1, supports 4K 30fps outputRTCReal-time clock with battery socket and ability to wake Compute Module 4STORAGEMicroSD card socket for Compute Module 4 Lite (without eMMC) variantsFAN HEADER5V/12V, allows speed adjustment and measurementPOWER INPUT5V or 7~36VDIMENSIONS145 × 90 × 40mmConnecting With Compute Module 4Standard CM4 Socket And Partial Raspberry Pi GPIO Header Suitable For Compute Module 4 Lite/EMMC Series Module4G/5G/LoRa Wireless Modules SupportOnboard M.2 Slot, Comes With Mini-PCIe Adapter As Well, Compatible With 4G/5G/LoRa Wireless Modules With M.2 Or Mini-PCIe InterfaceAn additional communication module is required to enable 5G/4G/3G/2G cellular network or LoRa gateway function, recommended: SIM7600G-H-M.2, SIM8202G-M2, SIM8200EA-M2, SIM7600G-H-PCIE, SX1302 868M LoRaWAN GatewaySIM7600G-H-PCIE 4G Module Optional4G/3G/2G communication, GNSS positioning, global coverageStandard Mini-PCIe interface, high compatibilityMulti-constellation high accuracy positioning GNSS receiver supportSuitable for LTE, UMTS, and GSM network with global coverageAbundant software functions: OTA, LBS, TLS, VoLTEUp to 150Mbps (Max) downlink data rate and 50Mbps (Max) uplink data rateSupports popular OS driver: Windows, Linux, Android etc.AT commands of the SIM7600G-H-PCIE series are compatible with the SIM7500/SIM7600 series modulesPlease refer to SIM7600G-H-PCIE product page for detailsFor quantity of 20pcs or more, other M.2 or Mini-PCIe modules are customizable (SIM7600CE-T / E-H / A-H, etc.), feel free to contact usRich InterfacesProviding Interfaces Including: CSI / HDMI / USB / ETH / CAN / RS485 / M.2 B KEYReserved Space For Heat Dissipationfor reference ONLY, heatsink and cooling fan are NOT included.Rail-Mount SupportRail-Mount ABS Protection Case, Easy To Install, More Safe OperationApplication ExampleSuitable For IoT Gateway, 4G/5G Router, IoT Data Acquisition And Monitoring, Industrial PLC, Or Other Industrial Applicationsfor reference only, CM4, display are NOT included.What’s On BoardCM4 socket suitable for all variants of Compute Module 4HDMI connector supports 4K 30fps outputUSB 2.0 ports 3x USB 2.0, for connecting sorts of USB devicesRJ45 Gigabit Ethernet 10/100/1000M compatibleDC power supply 7 ~ 36V DC inputCM4 status indicator PWR: Raspberry Pi power indicator ACT: Raspberry Pi operating status indicator4G/5G module status indicator M.2 PWR: module enable indicator M.2 NET: module operating status indicatorPWR & USB 5V DC power supply or USB programming portM.2 B KEY supports 4G/5G modules, or other communication modules using USB channelNano-SIM card slot supports standard Nano-SIM card for 5G/4G/3G/2G communicationBOOT selection ON: CM4 will be booted from USB-C interface OFF: CM4 will be booted from eMMC or Micro SD cardDC power supply 7 ~ 36V DC inputDual non-isolated RS485 2x RS485, with 600W lightningproof, anti-surge, and 15KV ESD protection (reserved 120R optional balancing resistor jumper)Non-isolated CAN ESD protection and transient spike voltage protection (reserved 120R optional balancing resistor jumper)Micro SD card slot for connecting a Micro SD card with pre-burnt image (Lite variant ONLY)FAN header for connecting cooling fan, allows speed adjustment and measurementCAM MIPI CSI camera port, 15Pin 1mm pitchRTC battery holder supports CR1220 button cellM.2 VCC selection select 3.3V or 4.2V power supplyRTC interruption configuration PI-RUN: CM4 will reboot on RTC interruption GL-EN: CM4 powerdown on RTC interruption D17: D17 pin is triggered on RTC interruption (default)IO-VREF selection set the CM4 IO logic level as 3.3V (default) or 1.8VFAN power supply selection select 12V (default) or 5V power to drive the fanSystem function configuration BT_DIS: Bluetooth disabled, for CM4 with antenna variant ONLY WiFi_DIS: WiFi disabled, for CM4 with antenna variant ONLY WP_DIS: boot mode switch, ONLY be used when NOT booted from eMMC or SD cardRTC/FAN I2C bus selection SDA0/SCL0: I2C-10 is shared with CSI/DSI (default) GPIO3/2: I2C-1 is shared with GPIO headerPartial GPIO header including 1x I2C, 2x GPIO pins, and power supplyOutline DimensionsResources & ServicesWIKI: CM4-IO-WIRELESS-BASE