Edatec HMI2632 based on CM4

DescriptionED-HMI2630-101C Features10.1″ TFT, resolution 1280×800, multi-point capacitive touch screenBroadcom BCM2711, quad core Arm Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHzUp to 8GB LPDDR4 RAM and 32GB eMMC storageSupport Micro SD card and M.2 NVMe SSD storage expansionDual Lans, 1 x Gigabit Ethernet and 1 x 100M Ethernet4 x isolated RS232/485 with electrostatic and surge protection2 x isolated CAN with led indicator, support CAN 2.0B standard8 x isolated DI with led indicator, support AC input8 x isolated DO with led indicator, support overcurrent protection2.4GHz and 5GHz dual-band Wi-Fi, Bluetooth and 4G LTEWide voltage power input range of DC 9V~36V with reverse polarity protection, overvoltage protection and overcurrent protectionIntegrated supercapacitor (backup power supply, optional) , RTC, Watch Dog, EEPROM and crypto authenticationEmbedded installation, compatible with VESA standard bracket installationDocument DownloadED-HMI2630-101C DatasheetED-HMI2630-101C User ManualED-HMI2630-101C Installing OSSpecificationsSystemCPUBroadcom BCM2711, quad core Arm Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHzVPUH.265(HEVC), up to 4Kp60 decodeH.264, up to 1080p60 decode, 1080p30 encodeGPUOpenGL ES 3.1 & Vulkan 1.0MemoryOptions for 1GB, 2GB, 4GB, 8GB LPDDR4-3200 SDRAMStorageOptions for 8GB, 16GB, 32GB eMMC storageMicro SD card (user storage expansion)M.2 NVMe SSD (options for 128GB, 256GB, 512GB) SoftwareOperating System– Raspberry Pi OS(Desktop) 32-bit– Raspberry Pi OS(Lite) 32-bit– Raspberry Pi OS(Desktop) 64-bit– Raspberry Pi OS(Lite) 64-bit Front I/OCameraBuilt-in 8-megapixel front camera(optional). Side I/OPower1 x DC IN, 2-Pin 3.5mm spacing phoenix terminals with screw holes.It supports 9V~36V input, the signal is defined as VIN /GND.RS485/23212-Pin 3.5mm spacing phoenix terminals with IO isolator, which are equipped with electrostatic and surge protection. Different numbers of RS232 and RS485 ports can be selected according to actual application. The signal of RS485 is defined as IGND/A/B, and the signal of RS232 is defined as IGND/TX/RX.ED-HMI2632-101C: 2 x RS485 2 x RS232ED-HMI2633-101C: 3 x RS485 1 x RS232ED-HMI2634-101C: 4 x RS485Audio1 x Audio In/Stereo Out, 3.5mm audio jack connector. It can be used as MIC IN and LINE OUT.– When a headphone is connected, the audio output switches to the headphone.– When no headphone is connected, the audio output switches to the speaker.1000M Ethernet1 x adaptive 10/100M ethernet port, RJ45 connector. It can be used to access the network.100M Ethernet1 x Audio port, 3.5mm audio jack connector, 4-pole stereo audio.CAN2 x CAN ports, 6-Pin 3.5mm spacing phoenix terminals– Isolation Protection: 3 KV– CAN Protocol: CAN 2.0B– Baud Rate: 10~1000 kbps– Signals: CANH, CANL, GNDDI8 x DI ports, 10-Pin 3.5mm spacing phoenix terminals– Sensor Type: Wet Contact (NPN & PNP), Dry Contact– Isolation Protection: 5 KV– Every 4 DI share one common pin (called COM): X0, X2, X4 and X6 share COMX0; X1, X3, X5 and X7 share COMX1– DI to COM:  ON: 5~30 VDC or -30~-5 VDC  OFF: 0~2 VDC or -2~0 VDCDO8 x DO ports, 10-Pin 3.5mm spacing phoenix terminals– Sensor Type: NPN– Isolation Protection: 5 KV– Output: 5~36 VDC (24 VDC is recommended), maximum current is 1.5A(per channel)SD Card Slot1 x Micro SD card slot, which is used to install SD card for storing user data.SIM Card Slot1 x Nano SIM card slot, which is used to install SIM card for getting 4G signal.Micro USB1 x PROGRAMMING port, which supports to flash to eMMC for the system.HDMI1 x HDMI port, type A connector. It is compatible with HDMI 2.1 and supports 4K 60Hz.USB 2.02 x USB 2.0 ports, type A connector, supporting up to 480Mbps.Antenna2 x SMA ports, using to connect 4G antenna and Wi-Fi/BT antenna.Speaker1 x PA output, built-in a 4Ω 3W speaker. Buttons and IndicatorsReset1 x Reset button, which can reset the device.PWR1 x red power indicator, which is used to check the status of device power-on and power-off.4G1 x green 4G indicator, which is used to check the status of 4G signal.ACT1 x green system indicator, which is used to check the working status of device.USER1 x green user indicator, user can customize a status according to actual application.COM1~COM44 x green UART indicators, using to check the communication status of UART ports.CAN0~CAN12 x green CAN indicators, using to check the communication status of CAN ports.X0~X78 x green DI indicators, using to check the input status of DI ports.Y0~Y78 x green DO indicators, using to check the output status of DO ports.Expansion I/O12V 1A3 x DC OUT, 2-Pin 2.0mm spacing WTB connector, supporting 12V 1A output.These pins are defined as GND/12V, reserving to provide power supply for extended LCD.10-Pin GPIO1 x GPIO Pin Header, 2×5-Pin 2.54mm spacing, using to lead out the expansion GPIO ports. User can customize the function according to actual application, these pins are defined as 8xGPIO/3V3/GND.USB1 x USB 2.0, 5-Pin 1.5mm spacing WTB connector, supporting to expand the USB 2.0 port.M.2 B1 x M.2 B, M.2 B Key connector, supporting to connect SSD. It is compatible with M.2 2230 and M.2 2242.Expansion PerformanceEEPROMSupports 4K byte storage and improves the ease of use of device.Crypto AuthenticationIt can be matched to realize the required upper layer application and improves the security of device.RTCRTC with 1F SuperCAP backup, which can ensure that the system clock is not affected by device power-off. We also provide a battery base, and you can buy a CR1220 battery backup for RTC.BuzzerA tip or an abnormity can be configurated according to actual application, which realizes the alarm function.Watch Dog*This function has been reserved on hardware. But we need additional software to support it, which is under development.LCDLCD Size10.1″ TFTResolution1280×800Colors16.7MBActive Area216.576mm(H) x 135.36mm(V)BacklightLEDMTBF>30000hLuminance400cd/m^2Contrast Ratio1000:1Response Time30msViewing Angle(CR≥10)80°(L)/80°(R)/80°(U)/80°(D) Touch ScreenTypeMulti-point Capacitive Touch ScreenTransmittance≥85％Connection MethodCOFController InterfaceI2CDriver SupportLinuxMulti-touch10 pointsSurface Hardness6HElectrical CharacteristicsInput Voltage9V ~ 36V DCMaximum Power Consumption25W Mechanical CharacteristicsDimensions258mm x 172mm x 61.5mm (WxDxH)Weight1.3KgInstallationEmbedded front installation WirelessWi-Fi/Bluetooth (optional)2.4GHz & 5GHz dual-band Wi-Fi and Bluetooth with antenna.– 2.4GHz Wi-Fi: Compatible with IEEE 802.11 b/g/n– 5GHz Wi-Fi: Compatible with IEEE 802.11 a/n/ac– The Bluetooth supports 2402MHz ~ 2480MHz frequency4G(optional)Connect with various 4G LTE modules through the Mini PCIe interface, with antenna.– EC20-CE Module (China/India)  LTE FDD: B1/B3  LTE TDD: B38/B39/B40/B41  TDSCDMA: B34/B39  WCDMA: B1  CDMA 1x/EVDO: BC0  GSM: 900/1800MH– EC25-AFX Module (North America)  LTE-FDD: B2/B4/B5/B12/B13/B14/B66/B71  LTE-TDD  WCDMA: B2/B4/B5  GSM/EDGE – EC25-AUX Module (Latin America/Australia/New Zealand)  LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B28  LTE-TDD: B40  WCDMA: B1/B2/B4/B5/B8  GSM/EDGE: B2/B3/B5/B8– EC25-EUX Module (Europe/Middle East/Africa/Thailand)  LTE-FDD: B1/B3/B7/B8/B20/B28A  LTE-TDD: B38/B40/B41  WCDMA: B1/B8  GSM/EDGE: B3/B8 Environmental & RegulatoryOperating Temperature-20℃~60℃Storage Temperature-25℃~60℃Ambient Humidity5% ~ 95% (non-condensing)CertificationsFCC– FCC 47 CFR Part 15 Subpart B CE– EN IEC 62368-1/EN IEC 62311/EN IEC 61000-3-2/EN IEC 61000-3-3– EN 55032/EN 55035/– EN 301 489-1/EN 301 489-3/EN 301 489-17/EN 301 489-52– EN 301 328/EN 301 440/EN 301 511/EN 301 908-1/EN 301 908-2System Block DiagramDimension Unit:mmOrder Information